Rock Set Kit 739Rsk - Valor G3 Installation Manual

Installation

Rock Set Kit 739RSK

Material required
• Rock Set Kit, which contains:
• 6 rocks
• 2 logs
• ceramic platform
• front support platform
• glass panel
• rock support
L R
1 4
2 5
3 6
• Gloves, if desired
Installation
Carefully unpack the kit. Note each rock has its own
number stamped on the bottom. The rocks have pegs to
help you place them on the rock support.
Install the kit as shown below.
1. Loosen the three screws holding down the fuel bed
support and slide the fl ange all the way forward.
Tighten the screws back down.
22
Ceramic platform
Front support platform
Glass panel
Rock
base
2. Place the front support
platform just inside the
fi replace between the
burner and the front
edge of the fi rebox. Be
careful not to damage
the liner panels as the
platform slides down
into place.
3. Place the rock support on top of the fuel bed sup-
port.
4. Place the ceramic platform as shown, fi tting around
the rock support.
Warning: This platform is quite fragile. DO NOT
force it into place!
Fuel Beds