Table of Contents
Advertisement
Redundancy Power Supply - 24V, 10 A, 240 W, Single-phase Input
Terminals and Wiring
16
The terminals are IP20 fingersafe constructed and suitable for field- and factory
wiring.
1606-XLE240ERL
Type
Solid wire max
Stranded wire max
American Wire Gauge
Max wire diameter (including
ferrules)
Wire stripping length
Screwdriver
1606-XLE240ERZ, -XLE240EDRZ,
-XLE240ECRZ
Type
Solid wire max
Stranded wire max
American Wire Gauge
Wire diameter max (including
ferrules)
Recommended tightening torque,
Max
Wire stripping length
Screwdriver
(1) Do not unplug the connectors more than 20 times in total.
Instructions for Wiring
•
Use appropriate copper cables that are designed for minimum operating
temperatures of: 60 °C for ambient up to 45 °C, 75 °C for ambient up to 60
°C and 90 °C for ambient up to 70 °C minimum.
•
Follow national installation codes and installation regulations!
•
Confirm that all strands of a stranded wire enter the terminal
connection!
•
Verify unused terminal compartments are securely tightened.
•
Ferrules are allowed and recommended.
Rockwell Automation Publication 1606-RM110A-EN-P - July 2020
Input
Output
Quick-connect spring-clamp termination
2
6 mm
2
4 mm
AWG 20-10
2.8 mm
10 mm (0.4 in.)
—
Input
Output
Plug connector with screw termination
2
2
4 mm
6 mm
2
2
2.5 mm
4 mm
AWG 20-12
AWG 20-10
2.4 mm
2.4 mm
0.5 Nm, 4.5 lb-in
0.5 Nm, 4.5 lb-in
7 mm (0.28 in.)
7 mm (0.28 in.)
3 mm slotted or cross-head No 2
DC OK-Signal
Push-in termination
2
1.5 mm
2
1.5 mm
AWG 24-16
1.6 mm
7 mm (0.28 in.)
3 mm slotted to open the
spring
DC OK-Signal
(1)
2
1.5 mm
2
1.5 mm
AWG 24-16
1.8 mm
0.8 Nm, 7 lb-in
6 mm (0.24 in.)
3 mm slotted
Advertisement
Table of Contents
