Ac Input - Allen-Bradley 1606-XLE240ERL Reference Manual

AC Input

Attribute
AC input
AC input range
Allowed voltage L or N to earth
Input frequency
Turn-on voltage
Shut-down voltage
External input protection
AC 100V
Input current Typ 2.63 A
Power factor Typ 0.99
Crest factor Typ 1.5
Startup delay Typ 300 ms
Typ 30 ms
Rise time
Typ 75 ms
Turn-on
Max 200 mV
overshoot
Figure 1 - Input Voltage Range
P
OUT
85V
Figure 3 - Input Current versus Output Current
Input Current, typ.
6A
5
a) 100V AC
4 b) 120V AC
c) 230V AC
3
2
1
0
2 4 6 8 10 12 14 16 18
The device is suitable to be supplied from TN-, TT-, and IT mains networks
with AC voltage. For suitable DC supply voltages See
Value
Nom AC 100...240V
Min 85...264V AC
Min 264...300V AC
Max 300V AC
Nom 50...60Hz
Typ 80V AC
Typ 72V AC
Typ 55V AC
The device is designed, tested, and approved for branch circuits up to 30 A (UL) or 32 A (IEC) without additional protection
device. If an external fuse is utilized, do not use circuit breakers smaller than 10 A B- or C-Characteristic to avoid a
nuisance tripping of the circuit breaker.
AC 120V AC 230V Notes
2.17 A 1.14 A At 10 A, see
0.99 0.97 At 10 A, see
At 10 A, The crest factor is the mathematical ratio of the peak value to RMS value of the input current
1.5 1.65
waveform.
290 ms 240 ms See Figure
30 ms 30 ms At 10 A constant current load, 0mF load capacitance, see
75 ms 75 ms At 10 A constant current load, 20mF load capacitance, see
200 mV 200 mV See Figure
Rated
input range
max.
500ms
V
IN
264V 300V AC
a
b
c
Output Current
20 22 24A
Rockwell Automation Publication 1606-RM110A-EN-P - July 2020
Redundancy Power Supply - 24V, 10 A, 240 W, Single-phase Input
Notes
—
Continuous operation
For maximal 500 ms (occasional)
Continuous, according to IEC 62477-1
±6%
Steady-state value, see
Steady-state value, see
Dynamic value (max 250 ms)
Figure 3.
Figure 4.
2.
2.
Figure 2 - Turn-on Behavior, definitions
Input
Voltage
Output
Voltage
Figure 4 - Power Factor versus Output Current
Power Factor, typ.
1.0
0.95
0.9
0.85
0.8
0.75
2 4
DC Input on page
Figure 1.
Figure 1.
Figure 2.
Figure 2.
- 5%
Start-up Rise
delay Time
a) 100V AC
b) 120V AC
c) 230V AC
Output Current
6 8 10 12 14 16 18 24A
20 22
8.
a, b
c
7