Table of Contents
Advertisement
Redundancy Power Supply - 24V, 10 A, 240 W, Single-phase Input
Approximate Dimensions
Figure 26 - Front View 1606-XLE240ERL
All dimensions in mm
Figure 28 - Front View 1606-XLE240ERZ,
-XLE240EDRZ -XLE240ECRZ
24
Width
39 mm (1.54 in.)
(1)
124 mm (4.88 in.)
Height
117 mm (4.61 in.)
(1)
The DIN rail height must be added to the unit depth to calculate the total required
Depth
installation depth.
Weight
600 g /1.32 lb
DIN-Rail
Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15 mm.
Body: Aluminum alloy
Housing material
Cover: zinc-plated steel
Keep the following installation clearances: 40mm on top, 20mm on the bottom, 5mm on
the left and right sides are recommended when the device is loaded permanently with
Installation clearances
more than 50% of the rated power. Increase this clearance to 15 mm in case the
adjacent device is a heat source (Example: another power supply).
Penetration protection
Small parts like screw with a diameter larger than 4 mm
(1) Without plug connectors.
Figure 27 - Side View 1606-XLE240ERL
Figure 29 - Side View 1606-XLE240ERZ,-XLE240EDRZ -XLE240ECRZ
Rockwell Automation Publication 1606-RM110A-EN-P - July 2020
All dimensions in mm
All dimensions in mm
Advertisement
Table of Contents
