Recommended Footprint - Quectel Smart Module Series Hardware Design

7.2. Recommended Footprint

NOTES
1. For easy maintenance of the module, keep about 5 mm between the module and other components
on the host PCB.
2. All RESERVED pins should be kept open and MUST NOT be connected to ground.
3. The 168-pin connector FX10A-168S-SV(21) of HIROSE should be used for connection with the
module.
SA800U-WF_Hardware_Design
Figure 36: Recommended Footprint (Top View)
Smart Module Series
SA800U-WF Hardware Design
97 / 106