Functional Diagram - Quectel Smart Module Series Hardware Design

NOTES
1)
1. The 2-lane MIPI CSI can only get data of RAW format. It can be used for ToF/3D camera modules
but cannot be used for display.
2)
2. Within the operating temperature range, the module is IEEE compliant.
"*" means under development.
3.

2.3. Functional Diagram

The following figure shows a block diagram of SA800U-WF and illustrates the major functional parts.

Power management

Baseband

LPDDR4X + UFS flash

Peripheral interfaces
-- USB interfaces
-- PCIe interfaces
-- UART interface
-- I2C interfaces
-- SPI interfaces
-- SD card interface
-- GPIO interfaces
-- SLIMbus interface
-- I2S interfaces
-- ADC interfaces
-- Vibrator drive interface
-- LCM (MIPI) interfaces
-- TP (touch panel) interface
-- Camera (MIPI) interfaces
-- Flashlight interfaces
-- Sensor interfaces
-- Emergency download interface
SA800U-WF_Hardware_Design
Smart Module Series
SA800U-WF Hardware Design
14 / 106