Advertisement
To view a different function, press and release the Select switch until the desired
function appears.
The message center goes into a "sleep" mode (i.e. goes blank) when the ignition is
turned off. Each time you press the Select switch, the message center is "awakened"
for 10 seconds. This allows you to scroll through the different functions.
If a warning alarm is triggered, a warning message will override all other displays
until the condition that caused the warning alarm is corrected. Some warning alarms
include an audible warning. Warning alarms are described in detail in Section 2.5.
To display the clock time, press and release the Select switch until the clock is dis-
played.
To change the clock time -
1. Press and release the Reset switch. The Hours display will flash, indicating the
value can be changed.
2. Press the Select switch to change the Hours value, or press the Reset switch to ac-
cept the displayed value and enable the Minutes value to be changed. To change
from AM to PM, scroll through 12 hours.
3. When the Minutes value is flashing, press the Select switch to change the value,
or press the Reset switch to accept the displayed value and exit the Change Time
function. Scrolling the Minutes value past 59 will not change the Hours value.
Advertisement
