User Guide 2N® EasyGate PRO
When the time is to be set, the user is informed about this fact by additional short tone before
dial tone. The LED network after connecting to network shines discontinuously (short breaks in
shining).
Code for setting: *06*YYMMDDhhmm#
Where:
YY: year
MM: month
DD: day in month
hh: hour
mm: minute
When the date is valid, the confirmation - OK is generated
otherwise there is there confirmation – bad.
Refill now
The command is intended for refilling of free minutes banks with predefined values (free
minutes) manually just now. This command is to be used for initialization or for manual
handling of system.
Code for setting: *07#
The confirmation: OK is generated
Setting of free minutes option – PCManager
All parameters, which can be set up by DTMF can be set up by PCManager too. There is page in
PCManager – Call table – Free minutes bank for this setting.
Free minutes bank – PCManager only
In Call table – FXS routing table is added column "Free minutes bank".
Called numbers can be associated to one of four groups (bank). All calls to numbers in the same
bank are handled the same way according to free minutes counting rules specific for bank. This
table is usually preset by supplier.
Setting options: 0–4 (0 – no bank selected, free minutes inactive)
Default setting: 0
Time setting
In Monitor you can check the actual time on PC and on Gateway
There are two commands for time setting in Monitor:
Synchronize to PC: The time in gateway is set according to actual time on PC
70 / 87