2N EasyGate PRO User Manual page 17

6. Enter the number of the parameter to be programmed and press
number is correct, you can hear the confirmation tone, if not, you get the rejection tone
and can re-enter the parameter number.
7. When the parameter number is confirmed, enter the allowed parameter value and press
.
8. . If the parameter value is in the allowed range, you can hear the saving tone, if not, you
get the rejection tone. You can enter another parameter number in either case.
Numeric parameters are programmed using numbers in the units included in the parameter
description. With YES/NO parameters use
To cancel any programming step in the programming mode, press
can hear the rejection tone and can enter a new parameter number. The parameters are saved
when the saving tone is transmitted. Hang up to quit programming.
Example:
Dial
for YES and
Confirmation
User Guide 2N® EasyGate PRO
for NO.
Description
Password entering, OK
Transmission volume parameter, OK
Set to medium level, saved
Non-existent parameter number, refusal
. If the parameter
. Having done so, you
17 / 87