2N EasyGate PRO User Manual page 33

tariff setting (5 pulses after call connect and then one pulse every 10 seconds). All other calls are
enabled and their tariff is one pulse every 30 seconds.
Operator for Integra (Function No. 405)
In some GSM networks you can add the # character and PBX subscriber number to the number
dialed. The subscriber number is displayed on other side together with the CLI. This parameter
takes place when the dialed number does not contain the # character.
Setting options: 0–8 characters (0–9)
Default setting: blank

Caution!
• Configuration using phone line programming (DTMF) is applicable for 'Other
prefixes' only.
Prefix (Function No. –)
A prefix identifying the call type (GSM, trunk call, free call, etc.). "Other numbers" is used for calls
with prefixes that are not included in the table.
Setting options: 0–14 characters (0–9, *, #)
Default setting: blank
Call enable (Function No. 391)
This parameter allows/bars the calls with prefixes included on the same row.
Setting options: YES/NO
Default setting: YES
Routing Table
User Guide 2N® EasyGate PRO
33 / 87