2N EasyGate PRO User Manual page 42

SMS text (Function No. 603)
The SMS text to be sent to the preset telephone number. If the SMS text is blank, an empty SMS
is sent.
Setting options: 0–40 characters
Default setting: blank
Send if activated longer than [ms] (Function No. 601)
Set the SMS activation time necessary for SMS sending. This parameter prevents SMS sending in
the event of short-time activation. If a "0" is selected, SMS is sent immediately upon the input
activation.
Setting options: 0–25500 ms
Setting step: 100 ms
Default setting: 0 ms
Timeout after sending [s] (Function No. 602)
Set the Time of inactivity after SMS sending. During this timeout, no SMS is sent even if the SMS
input gets activated. This prevents sending multiple SMS units in the case of repeated activation
of the input.
Setting options: 0–2550 s
Setting step: 10 s
Default setting: 0 s
GSM & SIM Parameters – SIM2 parameters – dual SIM version
Blocked for operator
For information only – not to be set. Provider blocking is set by the manufacturer in
®
2N EasyGate. If 2N
can be used. If an unacceptable SIM card is used, the gateway does not register to the network
and the LED network flashes quickly.
CLIR – incognito (Function No. 701) (SIM2-751)
Set the calling line identification restriction (CLIR) for outgoing calls from 2N
Warning: Before enabling be sure to have this feature activated by the GSM provider to avoid
outgoing call rejection by the GSM network.
Setting options: – According to provider (0) – depending on how the function is selected in the
GSM network.
®
EasyGate is blocked to the provider, no other mobile provider's SIM card
User Guide 2N® EasyGate PRO
®
EasyGate.
42 / 87