2N EasyGate PRO User Manual page 39

Hide thumbs Also See for EasyGate PRO:

Table of Contents



Caution

•

Configuration using phone line programming (DTMF) is applicable for 'Other

prefixes' only.

CLI – calling number (Function No. –)

Fill in CLI to route the call according to the parameter on the same table row. It is possible to fill

in only a prefix for a group of CLI's. If the parameter "Substring" = 0, you must fill in the prefix

you see on your mobile phone display. It means inclusive of + and the international prefix if

included. If "Substring" > 0, 2N

the received CLI, but at most to the position given by the "Substring" parameter. The positions

are counted from zero. See examples in the "Substring" parameter hint.

Setting options: 0–16 characters (0–9, *, #, +)

Default setting: blank

Substring (Function No. –)

The parameter is used for making the completion of the CLI prefix easier. If the parameter

"Substring" > 0, 2N

at most to the position given by the "Substring" parameter. The positions are counted from

zero.

For example: the received CLI +420603198222 corresponds with the following settings:

CLI – calling number

+420603198222

+420603

+420

603198222

603

Setting options: 0–15

Step: 1

Default setting: 0

SmartGate UMTS searches the filled-in prefix as a substring of

EasyGate searches the filled-in prefix as a substring of the received CLI, but

User Guide 2N® EasyGate PRO

Substring

any setting

4 or more

39 / 87

Table of Contents