2N EasyGate PRO User Manual page 47

Service
Hardware version
®
2N EasyGate hardware version – for information only (cannot be modified). Must be used for
communication with the manufacturer.
Firmware version
®
2N EasyGate firmware version – 2N
manufacturer can issue upgrades to extend functions. To load new firmware into 2N
use the Upgrade function. Keep communicating with the manufacturer.
Serial number
®
2N EasyGate serial number – for information only (cannot be changed). Must be used for
communication with the manufacturer.
Blocked for operator
Refer to GSM & SIM Parameters.
COM enable (Function No. 960)
With this parameter you can enable/disable the serial interface function. You can disable
communication in the operating mode, maintaining the special programming mode after power
up.
Setting options: YES/NO
Default setting: YES
Time limit for data connections (Function No. 961)
After the time elapses, the data/fax connection is terminated immediately without warning. The
"0" setting means that the function is disabled.
Setting options: 0–255 min
Step: 1 min
Default setting: 0
Telephone number for service SMS Function No.: 714
®
EasyGate central processor program version. The
User Guide 2N® EasyGate PRO
®
EasyGate,
47 / 87