2N EasyGate PRO User Manual page 40

Route to (Function No. 591)
It is possible to route an incoming GSM call to the FXS interface or reject it. When a call is routed
to the FXS port, you can use the CallBack feature. For correct functionality please set up the
"Max. ring time for CallBack" parameter.
Setting options: FXS (0) – incoming call is routed to FXS.
FXS CallBack (2) – incoming call is routed to FXS with CallBack functionality.
Reject (4) – incoming call is rejected.
Default setting: FXS
Dial in (Function No. 592)
The parameter "Dial in" is used for automatic connection to the switchboard operator or directly
to another subscriber. If this parameter is blank, the calling person has the telephone line fully
at its disposal and has to dial the subscriber number by DTMF. You can fill in only the # character
to disable the Integra function.
Setting options: 0–16 characters (0–9, *, #)
Default setting: blank
Time limit [min] (Function No. 599)
When the time elapses, the call connection is terminated immediately. You can hear a beep 30 s
before the call end and beeps every second 10 s before the end. The "0" setting means that the
function is disabled.
Setting options: 0–255 min
Setting step: 1 min
Default setting: 0 min
Free Minutes Bank
See subsection 4.6 for detailed description. This option can be used with Firmware 3.5x only.
SMS Sending Input Parameters
Telephone number for SMS (Function No. 600)
The telephone number to which an SMS is sent upon SMS input activation. If it is blank, the
function is off.
Setting options: 0–16 characters (0–9, *, #, +)
User Guide 2N® EasyGate PRO
40 / 87