2N EasyGate PRO User Manual page 48

Telephone number for service SMS. The number is common for GGMC SMS, for "LOW CREDIT"
SMS on prepaid SIM cards, for battery status SMS, power failure and for lift service SMS.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: empty
Time period for GGMC SMS [h] (Function No. 970)
Time interval for GGMC SMS sending. GGMC = GSM Gateway Monitoring Centre. The "0" setting
means that the function is disabled.
Setting options: 0–255 h
Step: 1 h
Default setting: 0
Battery status SMS (Function No. 962)
Set this parameter to allow the SMS with information on the battery status to be sent. Battery
disconnection (Battery Error) and connection (Battery Ready) as well as critically low voltage
(Battery flat) is reported by the SMS.
Setting options: enable (1)
disable (0)
Default setting: disable
Power failure SMS (Function No. 963)
The mains status can be reported when this parameter is set. The report about mains failure and
recovery is sent with a defined delay (Power off/on).
Setting options: disable (0)
enable with delay 1–255 min
Default setting: disable
Battery status reporting using P100 (Function No. 964)
This parameter allows the battery status to be reported using the P100 protocol with the
connected communicator 2N
Setting options: disable (0)
enable (1)
Default setting: disable
®
Lift1. For special versions of 2N
User Guide 2N® EasyGate PRO
®
EasyGate only.
48 / 87