2N EasyGate PRO User Manual page 44

– Disable (0)
Default setting: Enable
Wireless network selection (Function No. 705) (SIM2-755)
You can select the network connection technology, for UMTS gateways only.
Setting options: UMTS & GSM (0) – automatic selection, UMTS preferred
UMTS only (1)
GSM only (2)
Default setting: UMTS & GSM
Setting of SIM switching – dual SIM version only
SIM2 enable Function No.: 790
You can disable using off SIM2 on dual SIM gateway.
Setting options: Enable (0)
Disable (1)
Default setting: Enable
Return to SIM1 after Function No.: 791
Set time interval for SIM1 checking, if EasyGate is switched to SIM2 for reason of weak signal or
some other issue. Select Off, if you want to switch back to SIM1 only if problem occurs on SIM2.
\n\nSetting options:\n-1 Hour\n-1 Day\n-Off\nDefault setting: 1 Hour
Setting options: 1 Hour (0)
1 Day (1)
Off (2)
Default setting: 1 Hour
Low Credit Checking with Prepaid SIM – SIM1 only
Time period for low credit checking [h] (Function No. 710)
Set the change time interval between credit checks. If your credit drops under the defined
®
value, 2N EasyGate sends a "LOW CREDIT" SMS. The "0" setting means that the function is
disabled.
User Guide 2N® EasyGate PRO
44 / 87