GRAPHTEC FC8600 Series User Manual page 119

2
Press the [2] key (ARMS).
ARMS setting screen (1/4) is displayed.
3
Press the POSITION (▼) key.
ARMS SETTING screen (2/4) is displayed.
4
Press the [1] key (MARK TYPE).
MARK TYPE setting screen is displayed.
6
Press the [1] key (TYPE1) or the [2] key (TYPE2).
MARK TYPE 1
7
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (2/4).
8
Press the [MENU] key.
It will return to the default screen.
POSITION
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (◄) key (CANCEL).
Supplement
MARK TYPEs that the plotter can detect are 2
types shown in bottom left figures.
MARK TYPE 2
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (◄) key (CANCEL).
5-10