GRAPHTEC FC8600 Series User Manual page 238

Symptom LCD Display
E04012
E04013
E04014
E04015
E04016
E04017
E04018
E04019
E04021
E04022
E04023
Possible Cause
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
Media set lever was lowered.
There was cancel operation by the
user.
Registration mark was not
detected in the auto detection
area.
There was cancel operation by the
user.
Registration mark was not
detected.
13-11
Solution
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Reload the media and try again.
Redo the process.
Check the media. Check the print
position of the registration mark.
Redo the process.
Redo the sensor level adjustment.
Change the color of the
registration mark.
Check the media.
Check the print position of the
registration mark.