GRAPHTEC FC8600 Series User Manual page 141

11
Press the POSITION (▲▼) key and increase or decrease the
setting value. Set the X value measured in step 9.
12
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
S ENSOR OFFSET ADJ. is selected and it will return to SENSOR
OFFSET ADJ. screen.
13
Press the [4] key (Y).
SENSOR OFFSET ADJ. Y screen is displayed.
14
Press the POSITION (▲▼) key and increase or decrease the
setting value. Set the Y value measured in step 9.
15
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
S ENSOR OFFSET is selected and it will return to SENSOR
OFFSET ADJ. screen.
16
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (3/4).
17
Press the [MENU] key.
It will return to the default screen.
POSITION
POSITION
POSITION
POSITION
Supplement
It will return to ARMS setting screen (3/4)
without changing the setting when you press the
POSITION (◄) key (CANCEL).
5-32