GRAPHTEC FC8600 Series User Manual page 157

20
Press the POSITION (▲▼) key to set the original distance on
the data.
21
Confirm the setting and press the [ENTER] key (SET).
It will return to default screen once all the distance is set.
Supplement
l Measured distance is displayed in the top line in
the DISTANCE input screen. Input value (initially
same as measured value) is displayed under
that.
l If the input value is not changed, it will assume
that there is no difference between measured
distance and the distance in the data.
l Digits of settings can be changed by pressing
the [FAST] key.
Supplement
l It will return to default screen without changing
the settings when you press the POSITION (◄)
key (PREVIOUS).
DISTANCE input screen for point 3 is displayed
l
if it is set to 3POINTS or more, so repeat steps
9 and 10 to set.
6-6