Supplies - GRAPHTEC FC8600 Series User Manual

15 -
4

Supplies

Cutter plunger
Water-based fibertip pen
Water-based fibertip pen plunger
Oil-based ballpoint pen
Oil-based ballpoint pen plunger
Cross cut blade
Pouncing tool
RS-232C (for DOS/V equipment, 3 m) CB0023C-HS
Refer to the Cutter Blade Manual for the cutter blade.
Information on our latest supplies is available on the Graphtec homepage.
Item
PHP33-CB09N-HS
PHP33-CB15N-HS
PHP35-CB09-HS
PHP35-CB15-HS
KF700-BK
KF700-RD
KF700-BL
PHP31-FIBER
KB700-BK
PHP34-BALL
CT01H
CT02U
PPA33-TP12
Model
Used with Ф0.9 mm diameter cutter blades
Used with Ф1.5 mm diameter cutter blades
Used with Ф0.9 mm diameter cutter blades
Used with Ф1.5 mm diameter cutter blades
With 10 black water-based fibertip pens
With 10 red water-based fibertip pens
With 10 blue water-based fibertip pens
Water-based fibertip pen plunger (set of 1)
With 10 black water-based fibertip pens
Oil-based ballpoint pen plunger (set of 1)
Ultra-hard blade
1.2 mm diameter, plunger, pin (set of 1)
RS-232C cable (universal) 1
15-9
Contents