When the mirror is set to on, copy is performed in the following order.
The registration mark scan data cannot be copied.
Copy origin
point
Origin point
When the coordinate values rotation is set to on, copy is performed in the following order.
The registration mark scan data cannot be copied.
Copy origin
point
Origin point
Operation
1
Create one data you want to copy.
Cutting data is stored in the buffer memory.
2
Press the POSITION (▲▼◄►) key and move the tool carriage
to the position to copy.
Next page
Second copy
Third copy
First copy
Cross cut
space
Cross cut
Copy
space
space
Media is cross cut at this position.
Second copy
First copy
Cross cut
space
Cross cut
Copy
space
space
Media is cross cut at this position.
Cross cut
space
Copy
space
Third copy
Cross cut
space
Copy
space
POSITION
4-15