Table of Contents
Advertisement
page 48 of 54
Appendix C - Firmware Update
The device is updated via network from a Soundgrid host application (e.g.
Soundgrid Studio).
The firmware update will update the host device and the Soudngrid module.
The Soundgrid host application is displaying the status of the firmware:
• grey = firmware compatible
• blue = firmware compatible, but newer version exists
• red
= firmware not compatible and must be updated in order to use.
If a device requires updated firmware, click on the FW button to start a hardware
scan.
WARN ING
Do not disconnect the device or turn off the computer before 'Done' appears.
Once the update is ready, turn the device off and on to reset.
WARN ING !
It is strongly recommended to backup the device configuration (Save Session)
before running any update.
Appendix C - Firmware Update
EXBOX.SG Manual - Version 1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the EXBOX.SG and is the answer not in the manual?