Table of Contents
Advertisement
page 32 of 54
CHAPTER 5: Controlling
The device is managed via globcon remote control (p 38). To manage the
Soundgrid network a Soundgrid host application is required (p 32 / p 35).
For access via globcon the Soundgrid MIDI driver must be assigned first (p 21).
Soundgrid - Host
The remote control of EXBOX.SG requires a Soundgrid host application such as
Soundgrid Studio, MultiRack Soundgrid or eMotion LV1 being installed. From here
the control panel for EXBOX.SG can be launched (p 35).
Soundgrid Studio in setup mode showing EXBOX.SG in the device rack of the
system inventory.
Next to the device there are four buttons:
Control
Button
wheel
Click to open the control panel for EXBOX.SG
Share
Button
Click to share driver I/O with up to five hosts.
ID
Button.
Click to show a rainbow pattern on the LED 'STATE' at the front
panel.
Indicates the status of the device's firmware
FW
grey
= firmware compatible
blue
= firmware compatible, but newer version exists
red
= firmware not compatible and must be updated
in order to use.
CHAPTER 5: Controlling
EXBOX.SG Manual - Version 1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the EXBOX.SG and is the answer not in the manual?