Table of Contents
Advertisement
State
The status of the Soundgrid module is monitored by a LED at the front.
LED RGB - indicates the state of the SG module.
STATE
(OFF)
(ON, blue)
(blinking, blue)
(blinking, red)
(blinking, rainbow) = identify device active
(ON, yellow)
* The Soundgrid module starts into failsafe mode if its firmware is corrupted.
This may happen in very rare cases only. Should you encounter this state, please
contact support for further information.
EXBOX.SG Manual - Version 1.0
= module not available
= module is working
= module in failsafe mode*
= module is not connected with
Soundgrid network
= firmware update in progress or finished
CHAPTER 4: Operation
page 31 of 54
Advertisement
Table of Contents
Need help?
Do you have a question about the EXBOX.SG and is the answer not in the manual?