Table of Contents
Advertisement
Chapter 3: Installation
Installing the Device
1.
Open the packaging and check that the contents have been delivered
complete and undamaged.
2.
Place the device on a non-slip horizontal surface. The delivered pads may
be affixed to the bottom of the cabinet. Ensure a clean and dry surface
before affixing the pads.
WAR NI N G!
The synthetics of the delivered pads might cause stains on damageable surfaces.
To avoid staining of furniture surfaces it is recommended to place a protective plate
under the device.
WAR NI N G!
Avoid damage from condensation by waiting for the device to adapt to the
environmental temperature. Proper operation can only be guaranteed between
temperatures of 5º C and 45º C and a maximum relative humidity of 80%, non-
condensing.
Ensure that the unit has sufficient air circulation for cooling.
3.
Remove the protective cap from the optical MADI port(s) before use.
N OT E
Retain the protective cap if the optical port is unused. This will protect against
soiling which can lead to malfunction.
EXBOX.SG Manual - Version 1.0
Chapter 3: Installation
page 15 of 54
Advertisement
Table of Contents
Need help?
Do you have a question about the EXBOX.SG and is the answer not in the manual?