Table of Contents
Advertisement
D
P
s
3-4
RIP
IPIng anD
PlashguaRDs
INSTALLING SPLASHGUARDS
The splashguard is shipped inside each
merchandiser. a
merchandisers have
fter
been leveled and joined, and all drip piping,
electrical and refrigeration work has been
1.
completed, install the splashguard. End
splashguards are addressed on the next page.
To Install Splashguards:
1. Check to be sure that all splashguard
brackets are level with the floor.
2. Position top of splashguard with the top
angled in as shown in the illustration. Align
2. & 3.
the slots in the upper edge of the splashguard
with the tabs extending downward behind the
splashguard cover.
3. Engage the slots over the tabs and raise the
splashguard while pushing the bottom in.
4. Align the tabs on the splashguard brackets
with the slots in the bottom edge of the
splashguard. Engage the tabs in the slots and
drop the splashguard into place.
4.
P/N 0467434_P
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
Advertisement
Table of Contents
