Installing Splashguards - Hussmann IMPACT RL Installation And Operation Manual

D P
3-2
RIP

INSTALLING SPLASHGUARDS

The splashguard is shipped inside each mer-
chandiser. A merchandisers have been lev-
FTER
eled and joined, and all drip piping, electrical
and refrigeration work has been completed,
re-install the front color panel, then install the
splashguards.
First, position top of splashguard over the top
edge of the bracket; second, push the lower edge
of the splashguard toward the bottom of the
bracket until it snaps into place.
1
2
Splashguard
Joint
Splashguards are joined with a galvanized
metal splice connector that comes with the
joint kit. Join the splashguards before
installing on case.
P/N 0387183_D
S
IPING AND PLASHGUARDS
Splashguard
Retaining
Bracket
Splashguard
Splice Connector
Side
Detail
. .
WWW HUSSMANN COM