Removing Rear Flue Glass For Cleaning (Fig & Fng); Removing Scratches From Bumper; Cleaning Under Merchandisers - Hussmann Excel FWG Installation & Operation Manual

m
5-4
aIntenance
REMOVING REAR FLUE GLASS FOR
CLEANING (FIG & FNG)
1. Remove louvers, then remove the discharge
deflector brackets. The flue glass (with
retainer) may then be lifted out.
2. Remove interior panels to facilitate
thorough cleaning.
3. Reinstall in reverse order.
Flue Glass
Retainer
P/N 0467434_P
REMOVING SCRATCHES FROM
BUMPER
Most scratches and dings can be removed
using the following procedure.
1. Use steel wool to smooth out the surface
2. Clean area.
3. Apply vinyl or car wax and polish surface

CLEANING UNDER MERCHANDISERS

Remove splashguards not sealed to floor.
Use a vacuum with a long wand attachment
to remove accumulated dust and debris from
under the merchandiser.
Discharge
Deflector
Bracket
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
area of the bumper or top rail.
for a smooth glossy finish.