Offsetting Bumper; Bumper Removal - Hussmann Excel FWG Installation & Operation Manual

I
1-16
nstallatIon
OFFSETTING BUMPERS
Offsetting the bumper helps to disguise the
joint locations, giving the lineup a smoother
look.
Note: The Excel low
temperature case
BUMPERS ARE
DIRECTIONAL.
Look for an arrow
inside the bumper.

Bumper Removal

Although bumpers can usually be removed by
hand, a simple tool to remove bumpers can
be created by wrapping tape over the claw of
a small pry bar as shown here. The pry bar is
available at most local hardware stores.
P/N 0467434_P
Pull
Bumper
Internal
Joint Trim
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
Place the padded pry bar below the bumper
as shown below. The tape/padding lessens the
chance of damaging the color panel.
Padded Pry Bar
Do not use a screwdriver or other sharp
object, which will damage bumper and color
panel.
DO NOT USE SHARP OBJECT
Bumper
Color Panel