Installing Splashguards - Hussmann FG Installation And Service Manual

P/N 0467434_D

INSTALLING SPLASHGUARDS

The splashguard is shipped inside each merchan-
diser. A merchandisers have been leveled
FTER
and joined, and all drip piping, electrical and
refrigeration work has been completed, install the
splashguard. End splashguards are addressed on
the next page.
To Install Splashguards:
1. Check to be sure that all splashguard brackets
are level with the floor.
2. Position top of splashguard with the top
angled in as shown in the illustration. Align the
slots in the upper edge of the splashguard with
the tabs extending downward behind the splash-
guard cover.
3. Engage the slots over the tabs and raise the
splashguard while pushing the bottom in.
4. Align the tabs on the splashguard brackets
with the slots in the bottom edge of the splash-
guard. Engage the tabs in the slots and drop the
splashguard into place.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Bracket
Tab
Splashguard
Splashguard
Low Temperature
3-3
Base of
Case
1.
2. & 3.
4.
Excel