P/N 0467434_P
JOINING END MERCHANDISER TO
WIDE ISLANDS
NOTE: Merchandisers must be level before
joining.
1. Remove nuts and washers from outside of
end case.
2. Apply gaskets to wide island.
3. Move end as close to the wide island as
possible by using lever bar (mule). Take care
not to damage optional adjustable legs.
4. Verify upper front panel, front panel,
bumper retainer, and top rail alignment before
joining cases, and shim cases as necessary.
NOTE: Merchandiser must be leveled before
joining. Verify all top rails, panels and
bumper retainers of each merchandiser to be
joined align vertically before joining.
To correct vertical alignment of top rails and
upper front panel, adjust optional legs and, or
shims as necessary.
N
ote that aligNmeNt order is differeNt from
!
tighteNiNg order
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Verify alignment of panels, bumper
retainer and top rail.
Adjust (optional) legs or shim cases to ensure
vertical alignment of panels and top rails.
Install fasteners (parent to end).
Low Temperature
1-9
Shims
Excel