Position Of The Fittings And Operation Elements - Burkert 8650 Operating Instructions Manual

Type 8650 REV.2
Installation
16.5

Position of the fittings and operation elements

Screws (2x) for fastening the
pressure gauge module
Screws (4x) for
protective cover for filters
Clamping bolts (2x) for fastening
the AirLINE Ex on standard rail
Fig. 41: Position of fittings and operation elements
Fig. 42: Position of the inclined tie rods on the installed system
Fig. 43: Inclined tie rods of a segment and unlocking slider
Locking elements of electronic modules
(below the valves)
Inclined tie rods (in pockets),
2x per connection/valve segment
Unlocking slider
(only for right connection segments)
English
Screws (2x) for fastening
the valve
Inclined tie rods
65