Table of Contents
Advertisement
24 February, 1999
DUPLEX UNIT
6.10 DUPLEX UNIT
6.10.1 DUPLEX UNIT REMOVAL
[A]
A259R570.WMF
1. Open the duplex unit [A].
2. Remove the duplex unit (4 screws).
6.10.2 SEPARATION ROLLER REPLACEMENT
[A]
[C]
A259R571.WMF
[B]
1. Remove the duplex unit (see procedure 10.1).
2. Remove the separation roller assembly [A] (2 screws).
3. Remove the spring [B].
4. Replace the separation roller [C] (2 E-rings and 2 bearings).
NOTE: Be sure to install the separation roller (one-way clutch) so that the clutch is
visible.
6-77
Advertisement
Table of Contents
