Table of Contents
Advertisement
PAPER TRANSPORT, FUSING, AND PAPER EXIT SECTIONS
6.9.5 HOT ROLLER THERMOFUSE REPLACEMENT
1. Remove the top cover.
2. Remove the hot roller thermofuse [A] (1 screw and 2 connectors).
6.9.6 FUSING UNIT DISASSEMBLY
[C]
[A]
[D]
1. Remove the top cover.
2. Remove the oil supply pad (see Oil Supply Pad Replacement).
3. Remove the oil supply unit (see Pressure Roller and Pressure Roller Fusing
Lamp Removal).
4. Open the paper exit door behind the fusing unit [A].
5. Turn the pressure release screws [B] clockwise to release the pressure roller
pressure.
6. Disconnect the oil end sensor connector [C].
7. Remove two lock screws [D].
8. Remove the upper fusing unit assembly [E]
[A]
[B]
6-68
24 February, 1999
A259R601.WMF
[E]
[D]
A259R602.WMF
Advertisement
Table of Contents
