Table of Contents
Advertisement
Duplex Unit
Duplex Unit Removal
1.
Open the front door and pull out the duplex unit.
2.
Remove the slide rail roller on the left [A] and on the right [B] ( x 1).
3.
Lift out the duplex unit [C].
Reinstallation
• To re-install the duplex unit, insert the duplex unit partially, only until it enters the black guide rail, then
re-attach each slide rail roller.
• Next, push the duplex unit into the machine completely. This method prevents interference from the
guide plate during installation.
Duplex Unit
3
197
Advertisement
Table of Contents
