Table of Contents
Advertisement
DEVELOPMENT UNIT
6.6.2 POST DEVELOPER COLLECTION PROCEDURE
Follow the procedure in the flow chart shown below during the post developer
collection procedure.
Also use this flowchart after replacing the drum.
Replace only developers or
developers and OPC drum
Others (failure)
After the end, adjust the image quality. (Do the user mode ACC procedure. If
necessary adjust the ACC targets and/or the KCMY color balance.)
Start
Open front cover and turn on
power
Close front cover
Replace only developers?
Replace only OPC drum?
Replace developers and OPC
drum?
Run SP2-225-5
(Run developer setup: all colors)
Run SP3-964
(Display developer setup results)
Is result 1 displayed
(successful) or others
(failure)?
1 (successful)
(To image quality adjustment)
See the error code table
(Troubleshooting - Developer
Setup Results)
Take action as specified in the
Replace only OPC drum
Run SP3-126-1
(self-check)
Run SP3-975
(Display self-check results)
Is result 1 displayed
(successful) or others
(failure)?
1 (successful)
End
See the error code table
(Troubleshooting - Process
Control Self Check Results)
error code table
6-46
24 February, 1999
Others (failure)
A259R560.WMF
Advertisement
Table of Contents
