Acc Target Adjustment - Ricoh Aficio Color 3006 Service Manual

24 February, 1999

6.4.2 ACC TARGET ADJUSTMENT

The ACC targets can be adjusted with SP 4-501 and 4-502. This should be done
after the SBU is replaced.
The SP modes to adjust are as follows.
Copier: 4-501
4-501-001: Text K
4-501-002: Text C
4-501-003: Text M
4-501-004: Text Y
4-501-005: Photo K
4-501-006: Photo C
4-501-007: Photo M
4-501-008: Photo Y
Default setting: 5
Range: 0 to 8
The effect of the setting is similar to the Middle ID adjustment in the manual printer
gamma adjustment, but the ID ranges outside the central range are also affected
slightly.
If the ACC results are not satisfactory, adjust the ACC targets and/or KCMY color
balance.
Printer: 4-502
4-502-001: Text/Photo K
4-502-002: Text/Photo C
4-502-003: Text/Photo M
4-502-004: Text/Photo Y
6-31
COPY IMAGE ADJUSTMENT