20-BIN SORTER STAPLER (A834)
3.6.2 INSTALLATION
[A]
[D]
ø
CAUTION
Unplug the copier power cord before starting the following procedure.
When handling the sorter stapler, make sure to hold the parts shown [A].
Otherwise, the resulting damage may cause paper jams at the entrance.
NOTE: 1) Keep the shipping retainers after installing the machine. They will be
reused if the machine will be transported to another location.
2) Proper reinstallation of the shipping retainers is required in order to
avoid any transport damage.
1. Remove the strips of tape and the shipping retainers, as shown.
2. Open the front door [B] and remove the pieces of cardboard [C] and the strip of
tape [D] from the staple unit. Close the front door.
A834I500.WMF
[B]
A834I50I8.WMF
[C]
3-32
24 February, 1999
A834I501.WMF