Table of Contents
Advertisement
DEVELOPMENT UNIT
6.6.4 TONER COLLECTION TRAY CLEANING
[C]
[B]
A259R215.WMF
NOTE: Place a protective sheet on the floor. Take care not to spill developer on
the customer's floor.
1. Remove the left and right inner covers, transfer belt stay, and charge corona
unit, then pull out the drawer unit [A] (2 screws).
NOTE: Before drawing out the drawer unit when the transfer belt unit has been
removed, place a sheet of paper [B] on the registration roller [C]. This is
required because toner will spill from the rear end of the toner
collection coil from the drumonto the registration roller.
2. Remove the drum unit [D] (2 connectors) and cover the drum with paper.
NOTE: Cover the drum with a sheet of black paper or 5 or more sheets of
white paper. Otherwise, the drum will be exposed to light, subjecting it
drum to optical fatigue (see "Troubleshooting – Drum Light Fatigue").
3. Remove the toner collection tray [E] (2 screws) and clean it.
[D]
[A]
A259R305.WMF
6-48
24 February, 1999
A259R204.WMF
[E]
Advertisement
Table of Contents
