Table of Contents
Advertisement
ASSEMBLY
•• Assembly requires two persons.
•• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•• For help identifying small parts, see page 5.
1. Orient the Front Frame (16) and the Stop
Bracket (18) as shown.
Attach the Stop Bracket (18) to the Front Frame
(16) with four M12 x 30mm Screws (60) and four
M12 Washers (64); do not tighten the Screws
yet.
•• The following tools (not included) are required for
assembly:
one adjustable wrench
a set of metric hex keys
Assembly may be more convenient if you have a
set of wrenches. To avoid damaging parts, do not
use power tools.
1
16
6
60
18
64
64
60
Advertisement
Table of Contents
