Assembly - Freemotion F218.0 Owner's Manual

ASSEMBLY

• Assembly requires two persons.
• Because of its weight and size, the strength
equipment should be assembled in the location
where it will be used. Make sure that there is
enough clearance to walk around the strength
equipment as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• To identify small parts, see page 5.
1. Attach each Base Leg (16) to the Base (1) with
two M10 x 75mm Screws (39).
• Assembly requires the following tools (not
included):
an adjustable wrench
a metric hex key
Assembly may be more convenient if you have
your own set of wrenches. To avoid damaging
parts, do not use power tools.
1
1
16
6
16
39