ASSEMBLY
• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
1. Attach the Base (2) assembly to the Tower (1)
with four M10 x 30mm Screws (73) and four M10
Washers (58). Start all the Screws, and then
tighten them.
materials until assembly is completed.
• Assembly requires a set of metric hex keys. To
avoid damaging parts, do not use power tools.
1
58
73
6
1
2
58
73