Assembly - Freemotion EPIC SHOULDER F807.0 Owner's Manual

ASSEMBLY

• Assembly requires two persons.
• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, see page 6.
1.
Before beginning assembly, make sure
that you understand the information in
the box above.
Remove all parts (31, 32, 41, and 42) from the
Connecting Frame (38).
See the CABLE DIAGRAM on page 22 and
identify the Long Cable (40).
Insert the Long Cable (40) through the
Connecting Frame (38); make sure that the
threaded end of the Cable is extending from
the small end of the Connecting Frame.
Route the Long Cable (40) around the V-pulley
(42).
Attach the V-pulley (42) to the Connecting
Frame (38) with the M10 x 75mm Socket Bolt
(41), the two M10 Washers (31), and the M10
Locknut (32) that you just removed.
• The following tools (not included) are required for
assembly:
one adjustable wrench
one Phillips screwdriver
a set of metric hex keys
snap ring pliers
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
Threaded
End
40
Small
End
7
41
38
31
31
32
42