Table of Contents
Advertisement
ASSEMBLY
•• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
•• Place all parts in a cleared area and remove the
1. Orient the Base (2) as shown.
Attach the Base (2) to the Tower (1) with six M12
x 25mm Screws (68) and six M12 Washers (73);
start all the Screws, and then tighten them.
packing materials. Do not dispose of the packing
materials until assembly is completed.
•• Assembly requires a set of metric hex keys. To
avoid damaging parts, do not use power tools.
1
68
73
73
68
6
68
73
1
2
Advertisement
Table of Contents
