Table of Contents
Advertisement
ASSEMBLY
To make assembly easier, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the strength
equipment should be assembled in the location
where it will be used. Make sure that there is
enough clearance to walk around the strength
equipment as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1. Attach the Left Frame (4) to the Center Frame
(3) with two M12 x 20mm Hex Screws (17) and
two M12 Washers (16).
Attach the Right Frame (5) in the same way.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Assembly requires the following tools (not
included):
an adjustable wrench
a set of metric hex keys
Assembly may be more convenient if you have
a socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
5
3
6
4
17
16
17
Advertisement
Table of Contents
