Resetting Set Temp During Operation - Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced Operation Manual

Resetting Set Temp
During Operation
Step 1: Press TEMP Button during operation.
Step 2: Select the desired temperature by turning and press the Heater
Knob.
After 15 seconds, the mode will be escaped automatically.
Or push RUN/STOP Button as shown below to escape the mode.
Step 1: Push RUN/STOP Button during resetting the set temperature.
Step 2: Turn the Heater Knob clockwise and press the Heater Knob as
shown below.
4-8
Section 4
Control Panel