Autofold Operation; Autofold Out To Spray Position; Autofold In To Transport Position - Raven Case IH AutoBoom XRT Calibration & Operation Manual

AUTOFOLD OPERATION

NOTE: Ensure the machine propulsion lever is in the neutral position. AutoFold is disabled if the machine
propulsion lever is not in neutral.

AUTOFOLD OUT TO SPRAY POSITION

1. Press and hold the AutoFold switch in the UP position.
NOTE: Release the AutoFold switch at any time to abort the AutoFold cycle.
FIGURE 8. AutoFold Button
2. Release the AutoFold switch after the boom has reached the spray position.

AUTOFOLD IN TO TRANSPORT POSITION

1. Press and hold the AutoFold switch in the DOWN position.
NOTE: Release the AutoFold switch at any time to abort the AutoFold cycle.
2. Release the AutoFold switch after the boom has reached the transport position.
FIGURE 9. AutoFold Operation Main Screen
NOTE: It is not necessary to view the AutoFold Operation Main screen to perform automatic folding or
unfolding functions.
016-0235-002 Rev. B
AUTOBOOM XRT HOME SCREEN AND OPERATION
13