Page 2
The Cruizer II also creates a map of covered runs or areas for review in the office that may be used to help coordinate other snow management activities throughout the season.
Page 3
(implement history must be turned on). Note: A coverage area must be present from a previous swath before Cruizer II will display the next guidance path in Last Pass mode. Straight (A-B) Line Mode - Allows the operator to select a starting (A) point and an ending (B) point or compass heading through which Cruizer II draws a straight line as the guidance path.
Page 4
3. Touch Next to continue. 4. The Resume Job screen displays a list of jobs saved on the Cruizer II console Delete All Jobs or a USB flash drive connected to a USB port. To help identify saved jobs, the Resume Job screen displays the age and coverage area of each job as well as the distance from the current vehicle location to the saved job.
Page 5
Map Area Coverage History Note: Refer to the Cruizer II Operation Guide for details on the guidance screen display when not utilizing a snow depth reference map. 1. The Snow Mode icon is displayed along the top of the Guidance screen.
Page 6
• Range - Touch the displayed values to enter a new high or low threshold for creating the snow depth map. Cruizer II will paint the coverage map based upon the threshold values. Areas with no prior elevation information will be indicated by the “No Ref”...
Need help?
Do you have a question about the Cruizer II and is the answer not in the manual?
Questions and answers