Lubrication
Greasing the Spray Pump
Service Interval: Every 50 hours—Lubricate the
pump.
Every 50 hours/Yearly (whichever comes first)
Grease Type: Mobil XHP 461.
1.
Wipe the 2 remote grease fitting clean
61).
Figure 61
1. Back of the machine
2. Spray pump
2.
Pump grease into the remote grease fitting
(Figure
61).
3.
Wipe off the excess grease.
Greasing the Front Steering
and Suspension
Service Interval: Every 50 hours—Lubricate the front
steering and suspension.
Every 50 hours/Yearly (whichever comes first)
Grease Type: No. 2 lithium grease. Toro Premium
All-Purpose Grease is available from your Toro
Distributor.
•
Steering cylinder—2 grease fittings at each rod
end of the cylinder
•
Steering rod—2 grease fittings at each rod end
•
Spindle pivot—2 grease fittings at each side of the
machine
1.
Wipe the grease fittings clean
Figure
63).
2.
Pump grease into the grease fittings
and
Figure
63).
3.
Wipe off excess grease.
(Figure
g204693
3. Grease point (2)
(Figure 62
and
(Figure 62
Note:
The grease fittings positions are
illustrated in
Figure
1. Grease fitting
There are 2 fittings at each front wheel.
1. Grease fittings
Greasing the Boom Hinges
Service Interval: Every 100 hours
Important:
If the boom hinge is washed with
water, clear all water and debris from the hinge
assembly and fresh grease must be applied.
Grease Type: No. 2 lithium grease.
1.
Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2.
Pump grease into the bearing or bushing at
each fitting
(Figure
51
62.
Figure 62
Figure 63
64).
g187456
g187457